公共财政应急支持体系构建——以云南大姚地震为例   总被引：2，自引：0，他引：2       下载免费PDF全文

赵要军  陈安 《地震工程学报》2008,30(2):113-116

通过对2003年云南大姚地震中财政应急支持过程的回顾,分析了财政应对地震类突发事件中存在的一系列问题,并结合当前财政应急支持的现状,参照日本灾害救助的经验,提出了完善我国财政应急支持体系的对策建议.  相似文献   

兰州马衔山北缘断裂地震潜势评估   总被引：4，自引：2，他引：2       下载免费PDF全文

梁明剑  袁道阳  刘百篪  雷中生 《地震工程学报》2008,30(4):337-343

马衔山北缘断裂为晚第四纪活动的左旋逆走滑断裂,是对兰州市影响最大的控震断裂,自东向西可分为内官营段、马衔山段、七道梁段和雾宿山段4条次级断层段.其中雾宿山段为1125年兰州7级地震的发震断层段,其特征地震平均复发间隔为2 250～3 590年,最晚离逝时间为882年,在未来关注的200年内再次发生强震的可能性较小;马衔山段特征地震平均复发间隔约为3 120年,历史上曾发生过多次中等破坏性地震,其潜在地震危险性值得关注;七道梁段和内官营段未获得古地震复发间隔等参数,但历史上均发生过中等破坏性地震,未来仍存在中等破坏性地震发生的可能,其地震复发间隔可近似地参考马衔山断裂带上相应震级地震的平均值.  相似文献   

太行山山前断裂西南段地壳介质各向异性特征浅析   总被引：2，自引：0，他引：2  

吴晶  高原  石玉涛  太龄雪 《地震》2008,28(2):115-122

根据太行山山前断裂西南端, 包括石家庄及其周边地区的位于太行隆起与华北盆地两大地质构造单元交汇处的构造环境复杂情况。 该文应用SAM分析方法与首都圈近4年(2002年1月至2005年8月)的观测数据, 分析该区地壳介质各向异性特征。 研究结果表明, 太行山山前断裂西南端快剪切波平均偏振方向与华北区域最大主压应力场方向一致, 是区域应力环境的较好描述。 该区慢剪切波平均时间延迟比较首都圈西北部和东南部均较小。 区内台站的快剪切偏振方向既受到区域构造背景应力环境的作用, 又受到局部的NNE向构造带的制约, 是两者共同作用的结果。 井径(JNX)台站的剪切波分裂参数与紧邻台站有明显不同, 其原因有待更多数据加以补充并做细致讨论。  相似文献   

Seismic design and response evaluation of unbonded post‐tensioned hybrid coupled wall structures     

Yahya C. Kurama  Qiang Shen 《地震工程与结构动力学》2008,37(14):1677-1702

This paper presents an analytical investigation on the seismic design and response of coupled wall structures that use unbonded post‐tensioned steel coupling beams. Both monolithic cast‐in‐place reinforced concrete wall piers and precast concrete wall piers are considered. Steel top and seat angles are used at the coupling beam ends for energy dissipation. The seismic design of prototype structures to achieve target displacement‐based performance objectives is evaluated based on nonlinear static and dynamic time history analyses. Additional recommendations are provided on shear design. Comparisons with ‘conventional’ structures that use embedded steel coupling beams as well as isolated walls with no coupling are provided. The results indicate that while the peak lateral displacements of unbonded post‐tensioned coupled wall structures are larger than the peak displacements of structures with embedded beams, the residual displacements are significantly reduced as a result of the restoring effect of the post‐tensioning steel. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

Velocity structure and active fault of Yanyuan-Mabian seismic zone―The result of high-resolution seismic refraction experiment     

《中国科学D辑(英文版)》2008,(9)

The authors processed the seismic refraction Pg-wave travel time data with finite difference tomography method and revealed velocity structure of the upper crust on active block boundaries and deep features of the active faults in western Sichuan Province. The following are the results of our investigation. The upper crust of Yanyuan basin and the Houlong Mountains consists of the superficial low-velocity layer and the deep uniform high-velocity layer, and between the two layers, there is a distinct, and gently west-dipping structural plane. Between model coordinates 180-240 km, P-wave velocity distribution features steeply inclined strip-like structure with strongly non-uniform high and low velocities alternately. Xichang Mesozoic basin between 240 and 300 km consists of a thick low-velocity upper layer and a high-velocity lower layer, where lateral and vertical velocity variations are very strong and the interface between the two layers fluctuates a lot. The Daliang Mountains to the east of the 300 km coordinate is a non-uniform high-velocity zone, with a superficial velocity of approximately 5 km/s. From 130 to 150 km and from 280 to 310 km, there are extremely distinct deep anomalous high-velocity bodies, which are supposed to be related with Permian magmatic activity. The Yanyuan nappe structure is composed of the superficial low-velocity nappe, the gently west-dipping detachment surface and the deep high-velocity basement, with Jinhe-Qinghe fault zone as the nappe front. Mopanshan fault is a west-dipping low-velocity zone, which extends to the top surface of the basement. Anninghe fault and Zemuhe fault are east-dipping, tabular-like, and low-velocity zones, which extend deep into the base-ment. At a great depth, Daliangshan fault separates into two segments, which are represented by drastic variation of velocity structures in a narrow strip: the west segment dips westward and the east segment dips eastward, both stretching into the basement. The east margin fault of Xichang Mesozoic basin features a strong velocity gradient zone, dipping southwestward and stretching to the top surface of the basement. The west-dipping, tabular-like, and low-velocity zone at the easternmost segment of the profile is a branch of Mabian fault, but the reliability of the supposition still needs to be confirmed by further study. Anninghe, Zemuhe and Daliangshan faults are large active faults stretching deep into the basement, which dominate strong seismic activities of the area.  相似文献   

Dynamic simulation of interactions between major earthquakes on the Xianshuihe fault zone   总被引：3，自引：0，他引：3  

Hui Wang  Jie Liu  YaoLin Shi  Huai Zhang  GuoMin Zhang 《中国科学D辑(英文版)》2008,51(10):1388-1400

The authors firstly evaluate the strain accumulation rate of the Xianshuihe fault zone based on earth- quake activity. We calculated the stress and seismic moment accumulation rate for each subsection of the Xianshuihe fault zone based on the distribution of geological slip rate and GPS survey results. According to the results, we get the recurrence intervals of characterized earthquakes on each sub- section respectively. A three-dimensional finite element model for western Sichuan is constructed to discuss the earthquakes triggering among major earthquakes (M>6.7) that occurred along the Xianshuihe fault zone since 1893. The calculated Coulomb failure stress changes (ΔCFS) show that 5 of the 6 earthquakes with Ms>6.7 were triggered by positive ΔCFS. The interactions between major earthquakes not only influence recurrence intervals of characterized earthquakes on each subsection, but also change recurrence behavior of major earthquakes along the whole fault zone.  相似文献   

Newly-generated Daliangshan Fault Zone—Shortcutting on the central section of Xianshuihe-Xiaojiang fault system   总被引：3，自引：0，他引：3  

HongLin He  Yasutaka Ikeda  YuLin He  Masayoshi Togo  Jie Chen  ChangYun Chen  Masayoshi Tajikara  Tomoo Echigo  Shinsuke Okada 《中国科学D辑(英文版)》2008,51(9):1248-1258

The Daliangshan fault zone is the eastern branch in the central section of Xianshuihe-Xiaojiang fault system. It has been neglected for a long time, partly because of no destructive earthquake records along this fault zone. On the other hand, it is located on the remote and inaccessible plateau. So far it was excluded as part of the Xianshuihe-Xiaojiang fault system. Based on the interpretation of aerophotographs and field investigations, we document this fault zone in detail, and give an estimation of strike-slip rate about 3 mm/a in Late Quaternary together with age dating data. The results suggest that the Daliangshan fault zone is a newly-generated fault zone resulted from shortcutting in the central section of Xianshuihe-Xiaojiang fault system because of the clockwise rotation of the Southeastern Tibetan Crustal Block, which is bounded by the Xianshuihe-Xiaojiang fault system. Moreover, the shortcutting may make the Daliangshan fault zone replace the Anninghe and Zemuhe fault zones gradually, and finally, the later two fault zones will probably die out with the continuous clockwise rotation.  相似文献   

海南岛北西部新构造特征及其演化研究   总被引：3，自引：1，他引：2  

张军龙  田勤俭  李峰  高站武  苏刚 《地震》2008,28(3):85-94

利用DGPS系统测量海南岛西部阶地, 绘制地质地貌综合剖面, 将西部阶地分为海成阶地和河流阶地两种。 其中海成地貌包括一条砂堤和四级阶地: 砂堤宽2～10 m, 高程约10 m, 形成于5 ka以来; 海成一级阶地发育较好, 阶地面高程21～22 m, 形成于晚更新世至全新世之间; 海成二级阶地顶面高程约32 m左右, 形成于晚更新世晚期; 海成三级阶地较为发育, 阶地面高程40～42 m, 形成于121.8 ka; 海成四级阶地零星分布, 阶地面高程约57 m, 形成于中更新世晚期。 河流阶地也可分出四级: 一级阶地高程约20 m, 局部发育, 形成于11.4 ka; 二级阶地高程约34 m, 形成于47.2 ka; 三级阶地高约50 m, 其基座顶面标高约41 m, 形成于晚更新世早期; 四级阶地高程约71 m, 基座面标高约60 m, 形成于中更新世晚期。 这些阶地中均以二级最为发育。 晚更新世以来全区处于整体加速抬升的状态。 依据阶地面的综合剖面特征, 认为王五-文教断裂晚更新世以来的活动性较弱。  相似文献   

计算断层自发破裂过程的离散网格划分研究          下载免费PDF全文

刘启明  陈晓非 《地震学报》2008,30(5):449-455

离散化网格的空间步长选取在各种数值算法中都是一个很受关注的问题,在全空间均匀介质模型和简单离散化方案下,利用边界积分方程方法研究在自发破裂求解过程中动力学参数组合Dc和Te (Dc为临界滑动弱化位移,Te为有效的断层破裂面上的初始应力)对计算网格划分的影响,初步得到了Dc和Te参数空间中的有效计算网格的选取规律,对合理、有效地运用边界积分方程方法计算地震震源的破裂过程具有重要的指导意义.   相似文献   

Structural analysis and interpretation of the surface deformation associated with the Ning’er, Yunnan Province, China M _S6.4 earthquake of June 3, 2007     

杨晓平  陈立春  马文涛  陈慧  周挚  李岩峰  谢英情  施伟华  常祖峰 《地震学报(英文版)》2008,21(2):170-180

The seismogenic fault and the dynamic mechanism of the Ning’er, Yunnan Province MS6.4 earthquake of June 3, 2007 are studied on the basis of the observation data of the surface fissures, sand blow and water eruption, land-slide and collapse associated with the earthquake, incorporating with the data of geologic structures, focal mecha-nism solutions and aftershock distribution for the earthquake area. The observation of the surface fissures reveals that the Banhai segment of the NW-trending Ning’er fault is dominated by right-lateral strike-slip, while the NNE-trending fault is dominated by left-lateral strike-slip. The seismo-geologic hazards are concentrated mainly within a 330°-extending zone of 13.5 km in length and 4 km in width. The major axis of the isoseismal is also oriented in 330° direction, and the major axis of the seismic intensity VIII area is 13.5 km long. The focal mechanism solutions indicate that the NW-trending nodal plane of the Ning’er MS6.4 earthquake is dominated by right-lateral slip, while the NE-trending nodal plane is dominated by left-lateral slip. The preferred distribution orientation of the aftershocks of MS≥2 is 330°, and the focal depths are within the range of 3~12 km, predominantly within 3~10 km. The distribution of the aftershocks is consistent with the distribution zone of the seismo-geologic hazards. All the above-mentioned data indicate that the Banhai segment of the Ning’er fault is the seismogenic fault of this earthquake. Moreover, the driving force of the Ning’er earthquake is discussed in the light of the active block theory. It is believed that the northward pushing of the Indian plate has caused the eastward slipping of the Qinghai-Tibetan Plateau, which has been transformed into the southeastern-southernward squeezing of the southwest Yunnan region. As a result, the NW-trending faults in the vicinity of the Ning’er area are dominated by right-lateral strike-slip, while the NE-trending faults are dominated by left-lateral strike-slip. This tectonic  相似文献